By Katja Kromann

DIY faux stacked wood fire screen - a Kreg Jig project

DIY faux stacked wood fire screen - a Kreg Jig project
Faux fireplace log stack 2

We have been thinking about getting a table saw for a good long while. The amount of space it takes up has held us back so far. At the moment, we just don't have room for it.

Then, this summer when I went to a blogger conference, Kreg Jig - a tool company who makes the pocket screw jig we used when building the desk for B - had a stand there. They were showing a new tool - a Kreg Jig rip cut. A couple weeks later, I saw it at my local hardware store and I bought it after a very quick back and forth about the pros and cons with Frank via text. We paid about 35 dollars plus tax for it.

A rip cut is a guide that you can attach onto a circular saw, effectively turning it into a table saw on the go. Sort of. It enables you to set a guide and cut long strips of wood. It will work for a great number of projects where you would normally use a table saw, but of course not all of them. The wood piece you are working with needs to have a certain minimum width for instance, or it won't work.

Faux fireplace log stack 5

Here you can see the blue guide attached onto our circular saw  from the underside. There is a red pointer in the front which lines up with the saw blade.

Faux fireplace log stack 4b

Oh and please don't forget to unplug your circular saw before attaching the guide. #safetytip. Please read my disclaimer at the bottom of my website.

Now you can set the width of your cut and the guide will keep the saw at that distance to the edge. Here Frank is removing an inch from one of the sides of the screen.

Faux fireplace log stack

I got the idea to make a faux stacked wood screen a long time ago - last spring?, I think - because I just love the look in Emily's bedroom (from GoHausGo.com) Of course hers is the real thing: actual logs stacked, which granted looks much better. We needed to be able to remove the logs easily if we ever want to light a fire. That's when I thought of this faux screen. Since I had the idea, I have seen it a couple other places on line. Oh well... It's not a unique idea I guess.

For this project we used some left over filler material from when we built the seating bench in the master bathroom.

Frank cut it to fit inside our fire place. Then we cut some wood for a support stand.

Faux fireplace log stack

We used some more scrap wood for that and made two triangles.

Faux fireplace log stack

Next came the fun part of cutting all the pieces of firewood. I had originally found a couple of tree branches at the side of the road that we cut up first. That wasn't nearly enough wood, so I went to our local grocery store and bought some firewood, making sure I picked bags that had lots of round logs in them.

Faux fireplace log stack 8b

Some of the logs were too big to fit into our miter saw, but some of the smaller logs could just fit.

I instagrammed one of the wooden discs we cut. It was so pretty!

Faux fireplace log stack

All that cutting made quite a mess. Which makes for an awesome action shot, but not for an awesome neighbor, so we attached our shop vac to the saw and turned it on while sawing the rest of the discs. This really minimized all the saw dust.

Faux fireplace log stack

I dry-fitted all the discs to the screen to make sure we had enough. Then cut some more.

Faux fireplace log stack

Then I painted the screen a matte black to minimize the sheen. I wanted the screen to disappear as much as possible.

Faux fireplace log stack

I glued all the pieces onto the screen, making sure my pattern looked like gravity was at play.

Faux fireplace log stack 13

Then we added the support legs and checked that the screen did not fall over. If you make this project you will have to do this too. Depending on how thick you cut the discs, the screen could get heavier than the legs, so don't cut the discs too big. The screen is heavy once the wood is on there, and you don't want it to tilt out of the fireplace. You would have to add more weight to the support legs in that case.

Faux fireplace log stack 3

We made ours to fit quite snug.

For the mantel I filled a couple of glasses with dirt and faux succulents. I love that look. If you don't want to use real dirt, you could make a mixture of coffee grounds and sand or something like that too.

Faux fireplace log stack

Oh and wouldn't you know it ... the glue had not even dried on this project when I received an email from Kreg Jig that they would like to send me a package with a rip cut and a jig. I told them, I already have those tools, so they did not need to send them. Talk about great timing. Oh well.

You can read about how we built this fireplace here.


Some blog posts contain affiliate links to products I use. More information
This article: DIY faux stacked wood fire screen - a Kreg Jig project first appeared on http://ahomefordesign.com.
Share

Katja Kromann
About Katja Kromann

I am a Danish American decorating life in Seattle. I love all things design and DIY.

I can’t think of anything more fun than coming up with project, making it, photographing it and sharing it with you on my websites.

I am a Graphic Artist, a remodeller and home maker by day.

AHomeForDesign.com AHomeForCrafts.com AHomeForFood.com My Portfolio
You might also be interested in these posts
Categories
DIY faux stacked wood fire screen - a Kreg Jig project is posted in the category |




Search





We have been featured here




















Full list here
Search





We have been featured here




















Full list here

Visit the other sites too
Privacy Disclaimer Contact